How to make bootable pendrive through cmd (Command prompt ) - TechinBit- Best Techy Content available on this Site

Latest

propellars ads

20191216

How to make bootable pendrive through cmd (Command prompt )

How to make bootable pendrive through cmd (Command prompt )

How to make bootable pendrive through Command prompt : To manually create a bootable USB drive, we will use the command line as the default program for Windows. Here's a step-by-step guide to creating a bootable USB drive as your Windows installation media. To create a bootable USB drive as the Windows installation media, we need at least 4 GB for minimum capacity. 


        
format bootable pendrive using cmd, Bootable pendrive cmd, Bootable, Bootable pendrive cmd steps,make bootable pendrive through cmd, make bootable pendrive using cmd,  make bootable pendrive via cmd, make bootable pendrive by cmd,
Image by Photo Mix from Pixabay 

 
First we have to mount your ISO windows image.Follow below steps
  1.  Right click on “Iso Window Image”.make bootable pendrive through cmd, make bootable pendrive using cmd,  make bootable pendrive via cmd, make bootable pendrive by cmd,format bootable pendrive using cmd, Bootable pendrive cmd, Bootable, Bootable pendrive cmd steps
  2.  Click On Mount . after that your iso image is display on My computer/My pcmake bootable pendrive through cmd, make bootable pendrive using cmd,  make bootable pendrive via cmd, make bootable pendrive by cmd,format bootable pendrive using cmd, Bootable pendrive cmd, Bootable, Bootable pendrive cmd steps


After mount is done .You have to write some command in Command prompt .Follow below steps carefully
Insert the USB flash drive into a running computer. As a first step, we need to run the command line as administrator. To do this, we need to find cmd by typing " command prompt " in Windows Start menu. Select “Run as administrator”.


Type diskpart at the command prompt (without quotes) and press Enter. Wait a while until DISKPART starts up.
Type list disk to view the active drive. It would be seen that the active drives are shown as drive 0 for the hard drive and drive 1 for your USB flash drive with its total capacity.
Type select disk 1 to determine that disk 1 will be processed in the next step, then press Enter.
Type clean and press Enter to delete all data from the disk.
Type create primary partition and press Enter. 
Type select partition 1 and press Enter. Select "section 1" to configure it as the active section.
Type “active” and press Enter. Activation of the current section.
 format fs = fat32 quick quick and press Enter.
Type assign and press enter.this will assign letter to your drive so that drive letter are not similar to another drive
Type  exit and press Enter.
 (exit from diskpart not command promote and don’t   close command prompt window)

Type  xcopy H:\*.*/s/e/f I:\    then enter     
 (H: is your Mount drive ( also you mount by power iso or daemon tool)
 (I: usb derive letter)
make bootable pendrive through cmd, make bootable pendrive using cmd,  make bootable pendrive via cmd, make bootable pendrive by cmd,format bootable pendrive using cmd, Bootable pendrive cmd, Bootable, Bootable pendrive cmd steps